Methanol Recovery
Methanol Recovery
DM-5 Automatic Continuous In-
Line Flash Demethylator
MODEL DM-5
PRICE $59,000.00
- 208-240VAC Single Phase for DM-5 Skid (3 kW)
- 208-240VAC/480VAC 3 Phase Chiller (6 kW)
- 208-240VAC Single Phase Reservoir Tank and Pump Skid (1 kW)
- 5 gpm continuous reacted products flow rate for methanol recovery
- 180-190°F incoming reacted product temperature
- Liquid Ring Vacuum Pump
- Push Button Automatic Operation by PLC
- Intrinsically safe rated parts in contact with methanol
- Air Purged C1D2 Enclosure
- Outgoing fluid gear pump
- Recovered Methanol gravity drains from 5 ft
DM-10 Automatic Continuous In
-Line Flash Demethylator
MODEL DM-10
PRICE $92,000.00
- 208-240VAC Single Phase (3 kW)
- 208-240/480VAC 3 Phase Chiller, 10 ton (9 kW)
- 208-240VAC Single Phase Reservoir Tank and Pump Skid (1 kW)
- 10 gpm reacted products flow rate for methanol recovery
- 180-190°F incoming reacted product temperature
- Liquid Ring Vacuum Pump
- Push Button Automatic Operation by PLC
- Intrinsically safe rated parts in contact with methanol
- Air Purged C1D2 Enclosure
- Outgoing fluid gear pump
- Recovered Methanol gravity drains from 4 ft
DM-15 Automatic Continuous In
-Line Flash Demethylator
- 10-12 week lead time
MODEL DM-15
PRICE $122,000
features:
Continuous, automatic, and efficient methanol recovery for reuse
after a biodiesel reaction from combined reactant products of biodiesel
and glycerol or just biodiesel at a flow rate of 15 gpm (56.8 lpm)
- Base List Price: $122,000 USD + shipping
- Includes Class 1 Division 2 Air Purged Enclosure
- Intrinsically safe barrier for parts in contact with methanol
- Includes 15 ton chiller and chiller tank reservoir and pump
- Includes pump to move demethylated products from vacuum to
13 psi (30 feet of head) at 15 gpm.
Options:
- Sump tank(s) for biodiesel or glycerol pumping after separation
integrated into electrical enclosure. Signal can power a contactor to
run a pump to transfer the product.
List Price: $2,500 USD each tank.
- Additional flow switch for multiple holding or reactor tanks to allow for
continuous flow from multiple tanks.
List Price: $1,200 USD each additional flow switch.
Power requirements: 208-240VAC Single Phase (50/60 Hertz)
Automatic operation. One push of a button starts the process when fluids
are available. When fluids run out or there is a fault condition, the system goes
through a shutdown phase.
Built in fault checking (motors, low fluid, etc.) with automatic shutdown
or emergency shutdown.
